We are Independent
Technical Support
Provider for All Printers

HP Officejet Pro 8710 Troubleshooting

Is your HP Officejet pro 8710 Troubleshooting All-in-One Printer is annoying you with issues? Then go with the below section to fix the printer queries. Proceed with our simple troubleshooting steps to fix the issues instantly. Our professional team is always available to guide with better assistance.


Device Status

Print Queue

Device Conflicts

Printer Offline

Officejet Pro 8710 Network Connection Settings

    1. In the first place, the computer and network should be compatible.
    2. Secondly, go to the official site and search the Officejet pro printer software.
    3. Thirdly, hit on the download option to download the HP Officejet pro 8710 driver.
    4. Now, you need to wait until the driver gets completely downloaded.
    1. Then, move to the location where the driver file is saved.
    2. Sequentially, examine whether the HP Officejet pro 8710 printer is ready for installation.
    3. Eventually, trigger the installation wizard. During the installing process, choose either an Ethernet/wireless connection.
    4. Lastly, proceed with HP Officejet pro 8710 user manual instructions to complete the setup.

Officejet Pro 8710 Printer Network Connection Fails

  • Basically, you need to determine the HP Officejet pro 8710 printer setup problem.
  • Then, ensure whether the computer is properly connected with the network.

printer fail

  • Simultaneously, check whether the HP Officejet pro 8710 is properly connected with the network.
  • Now, check the wireless network connection stability.
  • Next, click on the Start icon, and navigate to Control Panel on your computer.
  • Here, pick the Network Connections. Eventually, run the automatic Diagnose option.
  • Follow the below steps, if still, you face network issues.
  • Hit on the Manage network connections. Consequently, validate the network connection status.
  • If the network is disabled, click on the network settings to enable it.
  • Lastly, the connection status between the devices will be effectively established.

Uninstall Drivers and Software

  • In the first place, remove unnecessary physical cable connections between the devices.
  • Next, click on the start icon on the left corner of the computer. Then navigate to the control panel section.
  • Now, search the uninstall option in the control panel section.
  • Eventually, tap on the uninstall option. Here find the Officejet pro 8710 printer.
  • Sequentially, right-click on the printer icon and choose the uninstall option.
  • Consequently, follow the Officejet pro 8710 printer instructions to uninstall the software.
  • Lastly, refresh the device settings by restarting the computer and Officejet pro printer.
  • Note: Delete all the driver setup files from the computer.

Printer Software Reinstall

  • Firstly, remove all the drivers, which occupies the hard disk storage.
  • Ensure the HP Officejet pro 8710 printer is ready for connection.
  • Then, find a reliable network to connect the HP Officejet Pro printer and computer.
  • Now, go to the manufacturer site to find the HP Officejet pro 8710 software.
  • Eventually, find the printer model and tap on the search field.
  • Here the browser will show the Officejet pro 8710 driver on screen.
  • Consequently, select the driver which can interface with the operating system.
  • Note: The browser automatically detects the operating system.
  • You can click on change if you want to change the operating system.
  • Next, move on with manual instructions for HP Officejet pro 8710 driver download.
  • Lastly, install the driver by following the wizard instructions.

Disable Firewall Printer Firmware

  • The Firewall Firmware is useful in blocking the threats from outside the network. But at times, this may cause certain issues.
  1. Unable to install the Officejet pro 8710 Printer software
  2. Printer is not recognized during software installation
  3. Print task being suddenly interrupted
  • To get rid of the above issues temporarily disabling the Firewall:
  • Firstly, download print and scan doctor and install it.
  • Secondly, explore the Network settings in the print and scan doctor.
  • Thirdly, choose the troubleshooting firewall option from the drop-down.
  • Now, check which firewall is enabled. And eventually, click on the disable option.
  • Similarly, disable all the firewall settings.
Scroll to Top