HP Officejet Pro 8022 Setup

HP Officejet Pro 8022 Printer Setup & Driver Download

HP Officejet Pro 8022 is an all-in-one printer for printing, scanning, copying, and fax. Its input paper handling capacity is 225 sheets and ten envelopes. Moreover, the output paper handling capacity is 60 sheets. It supports four print cartridges – cyan, yellow, magenta, and black. The print speed is 20 ppm for black prints and ten ppm for color prints.

Its resolution for printing is 1200 x 1200 dpi. The printer supports copying up to 99 copies, and the resolution is 600 dpi. For faxing, it allows color fax and has the memory to handle 100 pages. The memory of the OJ Pro 8022 printer is 256 MB.

HP Officejet Pro 8022 Printer Setup Instructions

  • Open the OJ Pro 8022 new printer package.
  • Now, you have to take the accessories and printer out from the box.
  • Remove the covering materials from your printer.
  • Then, take the USB cable and connect its one end to the printer port.
  • Now, plug the other end of the power cable into the wall outlet.
  • Power up the wall outlet.
  • Now, your OJ Pro printer will power up.
  • Make necessary changes in the HP printer settings.
  • Load compatible sheets in the printer tray.
  • Fill the cartridge slots with proper ink cartridges.
  • Connect the device and printer with your preferred network setup method.
  • Finally, print a test document.

HP Officejet Pro 8022 Driver Download & Install

Downloading and installing HP 8022 driver on the computer is a simple process. You can set up the driver on your windows and mac operating system. Here are the steps for HP Officejet Pro 8022 driver download and set up on both devices.

HP OJ Pro 8022 Driver Download - Windows 10

The general steps for downloading and installing HP Officejet Pro 8022 driver are:

  • Turn on the windows computer.
  • Download the suitable HP OJ Pro 8022 driver on the computer.
  • Then, open the driver file to run the installation process.
  • After that, proceed with the installation steps on the wizard.
  • Choose the connectivity setup method to proceed.
  • Finally, finish the driver installation and print a file.

HP OJ Pro 9014 Driver Download - MAC

The Simple instructions for HP Officejet Pro 8022 driver setup on MAC are:

  • Switch on the MAC
  • Download the printer driver on your device.
  • Open the downloaded driver file to initiate the driver setup.
  • Continue with the on-screen procedure.
  • Select the network setup method to continue.
  • Lastly, complete the HP Officejet 8022 driver setup and print a document.

HP Officejet Pro 8022 Wireless Setup

Wireless Setup Wizard

  • Turn on your HP OJ pro printer.
  • Go to the wireless menu and tap the wireless setup wizard.
  • The available wireless networks will appear on your printer LED screen.
  • Touch your network name to proceed with the Wi-Fi setup.
  • Finish HP Officejet Pro 8022 wireless setup
  • Print a test document to verify the Wi-Fi setup is precise.

HP Smart APP

  • Switch on your printer and device.
  • Download HP Smart App on your device
  • Install the software as per the steps given on the screen.
  • After that, open the software and make all the required changes in the settings.
  • Then, add your printer to the HP Smart App.
  • Finally, print a sample file.

HP Officejet Pro 9014 Troubleshooting

HP Officejet Pro 8022 Printer Diagnose

  • Download the software- HP Print and Scan Doctor on the device.
  • Run the software on the device and proceed with the wizard steps.
  • After the software installation, open it.
  • Click on the Start option and select your printer name.
  • Choose either “Fix scanning or Fix printing” as per your requirements.
  • If still your printer is having problem, then contact our tech team.

HP Officejet Pro 8022 Fails to Power Up

To fix this issue of the HP OJ Pro 8022 printer, follow the steps below:

  • Disconnect the USB cable from the printer.
  • Remove the USB cable from the electric source.
  • Now, check and ensure the USB cable is in proper condition.
  • Ensure that the electric outlet is working.
  • After some time, connect one end of the USB cable to the printer rear.
  • Connect the other end of the USB cable into the wall outlet.
  • Switch on the outlet.
  • Now, your OJ Pro printer will power up.

If your printer is still offline, reach out to our tech support team.